Aluminum fences have become a popular choice for modern courtyards, gardens, and commercial spaces due to their durability, aesthetic appeal, and low maintenance requirements. As a leading global manufacturer of aluminum fence panels, FENLUX offers customizable designs and products with high corrosion resistance to meet the needs of different scenarios. This article will explain the installation process of aluminum fence panels step by step to help you complete the project easily.

I. Preparations Before Installation

1．Planning the Layout and Measuring the Dimensions

Before starting the installation, it is necessary to clarify the boundary range and functional requirements of the fence (such as privacy protection or decorative purposes). Use a tape measure to measure the total length of the installation area, and calculate the number of required panels according to the standard size of FENLUX aluminum fence panels (usually 6-8 feet per panel). It is recommended to reserve a margin of 5%-10% to account for cutting losses.

2．Checking the Ground Conditions

Aluminum fences have relatively low requirements for the foundation, but the ground still needs to be level. If there is a slope in the terrain, you can choose a stepped installation or customize slanted panels. FENLUX supports providing pre-bending design services based on terrain data to reduce the difficulty of on-site adjustment.

3．Preparing Tools and Materials

Basic Tools: Level, Electric Drill, Impact Drill, Wrench, Tape Measure, Concrete Mixer

Main Materials: FENLUX Aluminum Fence Panels, Posts, Embedded Parts, Expansion Bolts, Concrete

Safety Equipment: Gloves, Safety Goggles, Dust Mask

II. Core Steps of Post Installation

1．Marking the Post Positions

According to the design drawings, mark the center points of the posts with wooden stakes or spray paint. The standard spacing is 6-8 feet (about 1.8-2.4 meters), which should match the width of the panels.Note: Additional reinforcement is required at corners and door frame positions.

2．Drilling Holes and Fixing the Embedded Parts

Use a drill bit with a diameter of 10-12cm to drill vertically downward. It is recommended that the depth be 1/3 of the post height (for example, a 2-meter post requires a 70cm deep hole).

Insert the embedded parts vertically into the holes, and pour concrete after calibrating with a level. The embedded parts provided by FENLUX are coated with an anti-rust layer, which can extend the service life.

3．Installing the Main Body of the Post

After the concrete has set for 48 hours (it needs to be shortened to 36 hours in summer), put the post over the embedded part and fix it with stainless steel bolts. It is recommended to cover the top of the post with a decorative cap to prevent rainwater from seeping in.

III. Panel Assembly and Fixing Techniques

1.Connecting the Panels to the Posts

Align the card slots of the FENLUX aluminum fence panels with the reserved interfaces of the posts, and fix them from the side with self-tapping screws.

Each panel needs to install 2 sets of fixing parts at the upper and lower beams to ensure that the wind pressure resistance meets the ASTM standard.

2.Solutions for Sloped Terrain

Stepped Installation: Install in sections on platforms of different heights, and leave a 2-3cm expansion joint between the panels.

Continuous Installation on a Slope: Use the patented hinge system of FENLUX, which allows the panels to be continuously laid at an inclination angle of 5°-15°.

3.Special Installation of Door Frames

Use thickened posts on both sides of the door opening (it is recommended that the diameter be ≥3 inches), and install double-sided hinges. FENLUX provides an integrated solution for intelligent access control systems, supporting fingerprint/APP control.

IV. Quality Inspection and Maintenance After Installation

1.Key Acceptance Criteria

The overall verticality error is<2mm/meter.

The gaps between the panels are uniform (≤5mm).

The door leaf opens and closes smoothly without jams.

2.Daily Maintenance Suggestions

Although aluminum fence panels have excellent weather resistance (passing the ISO 9227 salt spray test for ≥1000 hours), it is still recommended to carry out the following maintenance every year:

Wipe the surface dust with a soft cloth.

Check the tightness of the bolts.

Clean the drainage holes to prevent blockages.

V. Why Choose FENLUX Aluminum Fences?

As a professional manufacturer of aluminum fence panels, FENLUX offers the following core advantages:

1．25-year Warranty: Made of aviation-grade 6063-T5 aluminum alloy base material, with a tensile strength of ≥160MPa.

2．Customization Service: Supports spraying in the full range of colors in the RAL color card, and can replicate 12 surface treatment processes such as wood grain and stone.

3. Fast Delivery: Standard products are shipped within 3 days, and customized orders are completed within 15 working days.

Through the above professional installation process, FENLUX aluminum fence panels can perfectly blend into various architectural styles, accurately matching everything from modern simplicity to classical European styles. Visit the FENLUX official website now to get a free design plan and experience the quality upgrade brought by high-end fence solutions.